OEM/ODM Natural Single Point Diamond Wheel Dresser Grade DE60

OEM/ODM Natural Single Point Diamond Wheel Dresser For Diamond Grinding Wheel Grade DE60

Description:

Diamond is made of pure carbon. The hardness and optical properties of diamond are unique because of its compact, tightly bonded crystalline structure. The conditions needed to produce this structure were for many years believed to be very high temperature and pressure, similar to the growth environment for natural diamonds.

Single point means only one cutting edge is presented to the Grinding Wheel. These are made from selected Diamonds according to their structural strength. The proper selection of size and quality is according to the wheel Diameter and Width. With qualified judgment according to parameters and Depth of cut, Drag Angle, coolant, we offer the grade of Diamonds such as:
I) Natural Point
II) Brutted Point (Congo round) for excellent results.

The Single Point Diamond Dresser is more versatile dressing tool, which is used for turning and dressing of grinding wheel. They are made of carefully selected raw diamonds mounted in holders by means of special bonds. The dressing tool takes care of two main functions, it removes abrasive grains which have become completely worn out, and it recreates the correct geometric shape of the grinding wheel.

Single point "bruted diamond" dressers are made with selected "Congo Rounds" mounted in a matrix. A Single cutting edge is presented to the grinding wheel.

Diamonds for single point dressers are selected in accordance with quality and size. The question of using a superior, average or commercial quality depends on the grinding finish required and the machines and working parameters.

We offer three grades namely A, B & C for all the diamond size, Availability: 0.25 Ct to 5.00 Ct

Natural Point Diamonds: The Diamond points are naturally formed. (Not man made like grades A, B, & C) This is a gift of nature. Natural Point Diamond Dressers have high form retention properties. Availability: 0.10 Ct to 2.50 Ct

Specification for our HID-V series diamond dresser:

Notice
- Because of the diamond particles smaller, dressing will produce a lot of grinding heat, if not pouring cutting fluid timely, diamond will burn, which may effect the precision of dressing and wear-resisting degree.
- It is very important to control the proper feeding when in fine grinding,because if you give it too much, it will not meet the accuracy requirements, also lead to big wastage of the diamond and the grinding wheel.
- in order to achieve ideal finishing effect and use its sharp surface better, you need to take the diamond tools down after diamond grinding edges blunt, and change an Angle to install it.

Recommended Areas:
Dressing tool clamped as close as possible to avoid vibration
Angle of the dresser should be radial 10 ° to 15 °
Delivery up to 0.03 mm (30 microns)
Feed up to 0.2 mm
Good cooling, they must use the dressing at the start - otherwise danger of cracking
Turn to the formation of the diamond surface axially by 90 °
Timely comprise boosts efficiency

To maintain the trust of our customers, we are offering high quality Single Point Diamond Dressers. These dressers are used to abrasive grains from metals and to recreate the correct shape of the grinding wheel. We make use of specific quality diamonds, which are mounted in holders using special bonds. The Single Point Diamond Dressers are available in many sizes and specifications for the various needs of our customers.

The features for our Harmony diamond dresser:
1.Higher Output diamond dresser
2.different size dresser availiable
3.diamond size from 0.1ct-5.0ct

Application for our HID-V series diamond dressing tools:
The product angle precision grinding for tool grinder, grinding machine inside the arc, outside the arc grinders and other precision molded wheel trim
For normal abrasive wheels and abrasive wheels for Bearing
For processing of Input shaft / Output shaft
For procession of Crankshaft and Gear