Electroplated Single Point Natural Diamond Wheel Dresser Grade D33#

SGS Electroplated Single Point Natural & Synthetic Diamond Wheel Dresser Grade D33#

Description:

Single point means only one cutting edge is presented to the Grinding Wheel. These are made from selected Diamonds according to their structural strength. The proper selection of size and quality is according to the wheel Diameter and Width. With qualified judgment according to parameters and Depth of cut, Drag Angle, coolant, we offer the grade of Diamonds such as:
I) Natural Point
II) Brutted Point (Congo round) for excellent results.

The Single Point Diamond Dresser is more versatile dressing tool, which is used for turning and dressing of grinding wheel. They are made of carefully selected raw diamonds mounted in holders by means of special bonds. The dressing tool takes care of two main functions, it removes abrasive grains which have become completely worn out, and it recreates the correct geometric shape of the grinding wheel.

Single point "bruted diamond" dressers are made with selected "Congo Rounds" mounted in a matrix. A Single cutting edge is presented to the grinding wheel.

Diamonds for single point dressers are selected in accordance with quality and size. The question of using a superior, average or commercial quality depends on the grinding finish required and the machines and working parameters.

We offer three grades namely A, B & C for all the diamond size, Availability: 0.25 Ct to 5.00 Ct

Natural Point Diamonds: The Diamond points are naturally formed. (Not man made like grades A, B, & C) This is a gift of nature. Natural Point Diamond Dressers have high form retention properties. Availability: 0.10 Ct to 2.50 Ct

Specification for our HID-V series diamond dresser:

Stability of Diamond
Diamond has stable chemical properties, acid and alkali resistance. It does not interact with concentrated HF, HCl, or HNO3 at high temperatures. It only works in the melt of Na2CO3, NaNO3, KNO3, or when it is boiled with the mixture of K2Cr2O7 and H2SO4. Slightly oxidized; corrodes in high temperature gas of O, CO, CO2, H, Cl, H2O, CH4.

Diamond also has non-magnetic properties, poor electrical conductivity, lipophilic and hydrophobic properties, and triboelectric properties. Only type IIb diamond has good semiconductor properties. According to the difference in nitrogen impurity content and thermal, electrical and optical properties of diamond, diamond can be divided into two types, type I and type II, and further subdivided into four subtypes: Ia, Ib, IIa, and IIb. Type I diamonds, especially Ia subtypes, are common ordinary diamonds, accounting for about 98% of the total natural diamonds. Type I diamonds all contain a certain amount of nitrogen and have good thermal conductivity, poor electrical conductivity and good crystal shape. Type Ⅱ diamond is extremely rare, contains little or almost no nitrogen, has good thermal conductivity and characteristics of curved crystals. Subtype IIb diamond has semi-conductivity. Because of the excellent properties of type II diamond, it is mostly used in space technology and cutting-edge industries.

Recommended Areas:
Dressing tool clamped as close as possible to avoid vibration
Angle of the dresser should be radial 10 ° to 15 °
Delivery up to 0.03 mm (30 microns)
Feed up to 0.2 mm
Good cooling, they must use the dressing at the start - otherwise danger of cracking
Turn to the formation of the diamond surface axially by 90 °
Timely comprise boosts efficiency

To maintain the trust of our customers, we are offering high quality Single Point Diamond Dressers. These dressers are used to abrasive grains from metals and to recreate the correct shape of the grinding wheel. We make use of specific quality diamonds, which are mounted in holders using special bonds. The Single Point Diamond Dressers are available in many sizes and specifications for the various needs of our customers.

The features for our HID-V angle diamond dresser:

- Long service time and reduce the dressing costs per workpiece
- High precision and efficiency when working, and optimize utilization of machine capacity
- Rapid incorporation of complex profiles in the grinding wheel
- Choose different diamond dressing tools on basis of diameter, width, and grain size of the grinding wheels
- The cross feed rate and cutting is dependent upon grain size, the lower the feed rate, the finer the surface finish

Application for Harmony HID-V series diamond dressing tools:
The product angle precision grinding for tool grinder, grinding machine inside the arc, outside the arc grinders and other precision molded wheel trim
For normal abrasive wheels and abrasive wheels for Bearing
For processing of Input shaft / Output shaft
For procession of Crankshaft and Gear