Single Point Synthetic Industrial Diamond Wheel Dresser Grade F250

High Performance Single Point Synthetic Industrial Diamond Wheel Dresser Grade F250

Description:

Diamond is a mineral composed of carbon. It is an allotrope of graphite with a chemical formula of C. It is also the original body of common diamonds. Diamond is the hardest substance naturally occurring in nature. Graphite can form synthetic diamonds under high temperature and high pressure. Diamond has a wide range of uses, such as handicrafts, cutting tools in industry, and it is also a precious gemstone.

Single point means only one cutting edge is presented to the Grinding Wheel. These are made from selected Diamonds according to their structural strength. The proper selection of size and quality is according to the wheel Diameter and Width. With qualified judgment according to parameters and Depth of cut, Drag Angle, coolant, we offer the grade of Diamonds such as:
I) Natural Point
II) Brutted Point (Congo round) for excellent results.

The Single Point Diamond Dresser is more versatile dressing tool, which is used for turning and dressing of grinding wheel. They are made of carefully selected raw diamonds mounted in holders by means of special bonds. The dressing tool takes care of two main functions, it removes abrasive grains which have become completely worn out, and it recreates the correct geometric shape of the grinding wheel.

Single point "bruted diamond" dressers are made with selected "Congo Rounds" mounted in a matrix. A Single cutting edge is presented to the grinding wheel.

Diamonds for single point dressers are selected in accordance with quality and size. The question of using a superior, average or commercial quality depends on the grinding finish required and the machines and working parameters.

We offer three grades namely A, B & C for all the diamond size, Availability: 0.25 Ct to 5.00 Ct

Natural Point Diamonds: The Diamond points are naturally formed. (Not man made like grades A, B, & C) This is a gift of nature. Natural Point Diamond Dressers have high form retention properties. Availability: 0.10 Ct to 2.50 Ct

Specification for our HID-V series diamond dresser:

Physical properties - numerical values
Hardness -60,000 to 100,000 MPa, depending on crystal direction and temperature
Bending strength -210~490MPa
Compressive strength -1500~2500MPa
Elastic modulus - (9 ~ 10.5) × 10 12 power MPa
Thermal conductivity -8.4~16.7J/cm·s·°C
Mass heat capacity -0.156J/(g·°C) (normal temperature)
Start oxidation temperature -900~1000K
Start graphitization temperature -1800K (in inert gas)
Friction coefficient between aluminum alloy and brass -0.05 to 0.07 (at normal temperature)

Recommended Areas:
Dressing tool clamped as close as possible to avoid vibration
Angle of the dresser should be radial 10 ° to 15 °
Delivery up to 0.03 mm (30 microns)
Feed up to 0.2 mm
Good cooling, they must use the dressing at the start - otherwise danger of cracking
Turn to the formation of the diamond surface axially by 90 °
Timely comprise boosts efficiency

To maintain the trust of our customers, we are offering high quality Single Point Diamond Dressers. These dressers are used to abrasive grains from metals and to recreate the correct shape of the grinding wheel. We make use of specific quality diamonds, which are mounted in holders using special bonds. The Single Point Diamond Dressers are available in many sizes and specifications for the various needs of our customers.

The features for Harmony diamond dresser:

Have sharp edges and corners of natural diamond, the contact area is lesser when in the fine grinding with grinding wheel so that minimize the attrition rate of diamond.

- Long service time and reduce the dressing costs per workpiece
- High precision and efficiency when working, and optimize utilization of machine capacity
- Rapid incorporation of complex profiles in the grinding wheel
- Choose different diamond dressing tools on basis of diameter, width, and grain size of the grinding wheels
- The cross feed rate and cutting is dependent upon grain size, the lower the feed rate, the finer the surface finish

Application for Harmony diamond dressing tools:
Our products are suitable for various types of grinding wheel dressing:
For normal abrasive wheels and abrasive wheels for Bearing
For processing of Input shaft / Output shaft
For procession of Crankshaft and Gear