Resin Bond Superthin Diamond Cutting Disc For Magnetic Materials

80RPM marble granite Diamond Cutting Disc For Magnetic Materials

Description:

Ultra-thin diamond cutting discs are mainly used for cutting and grinding hard and brittle non-metals such as marble, granite, jade, concrete, ceramics, oxides, refractory materials, and glass. The basic structure of our ultra-thin diamond cutting discs is that the middle is made of metal and the outer ring is a diamond working layer. Due to the use of high-rigidity metal materials to integrate the steel core and the metal bond of the outer ring, high rigidity is obtained, and high load and deep cutting can be realized. By choosing different types of bonding agents, it can be suitable for cutting and grooving of various materials.

Specification:

Features:
Resin bond diamond Cuttig discs can self-sharpen and cut sharply. The work qulity can be improved due to the elastic resin bond.
The thickness of work layer is as same as steel plate. They are mainly used tor precise grooving and cuttng.
The thickness of work layer is higher than the steel plate. They have advantages for removing chips and cooling They are mainly used for deep cutting and grooving of compoment.

Resin Bond Diamond Cutting Discs Series

Diamond Cutitng Disc for Quartz and High Borosilicate Glass Tube Process
This product specializes in precision cutting of quartz and borosilicate glass tubes. It has sharp cutting sharpness, good smooth section and long service life.

Mainly used in high borosilicate glass tube, quartz tube, electodeless lamp, U-tube, electronic cigarette tube, chemical laboratory equimpment and other quartz glass shaped products.

Diamond Cutting Disc for Quartz Crucible
Mainly used for precision cutting or grooving quartz products, suitable for the following products: quartz glass rod, quartz glass sheet, quartz glass crucible, furnace core rod, quartz glass boat, quartz crucible, etc. with the features of sharp cutting, smooth section and long service life.

Diamond Cutting Disc for Optical Glass
Mainly used for optical glass cutting, including camera lens, microscope lens, magnifying lens, telescope lens, spectacle lens and other optical glass. With the features of high sharpness, small slit, long life, it can completely replace the imported products. Any specifications can be customized.

Diamond Cutting Disc for Carbide Processing
This product is used for processing carbide (cobalt-tungsten alloy YG8) and can provide perfect cutting and slotting for rods and bolcks according to customer's needs.
With the feature of sharp cutting, long service life, smooth cutting surface without breakage. Any specifications can be customized.

Diamond Cutting Disc for Glass Cup and Tea Strainer Slotting
Mainly used for slotting tea strainer of glass cup. With the features of sharp cutting, smooth cutting surface, no cracks, no chipping. It can maintain stable sharpness and good cutting life, greatly improve production efficiency and yield for users.

Diamond Cutting Disc for Magnetic Materials

This material is brittle. Our diamond cutting disc can efficiently cut NdFeB, silicon steel, amorphous, nanocrystalline, ferrite, magnetic powder core and other materials. Any specifications can be customized.

Detailed Processing Range:

Glass material: Various glass tube / Glass spout / Tea strainer/ High borosilicate glass (electronic cigarette) / Capillary glass tube / Optical glass / Quartz glass / Crystal glass/ Gem/ Crystal Jade
Ceramic material: Alumina / Zirconia / Silicon Carbide / Boron Carbide / Boron Nitride / Black Ceramic / Glass Products
Abrasive material: Refractory / Superfinishing stone
Magnetic material: Ferrite / NdFeB
Alloy material: High speed steel / Abrasive seel Alloy steel
Brittle metal material: Carbide (YG Series)

Precautions for use:
1. Please check carefully before installing the cutting wheel, if there is a chip or other damage, please stop using it.
2. When the cutting wheel is marked with the direction of rotation, it must be consistent with the direction of rotation of the machine tool. On the contrary, the cutting is not sharp, and it is difficult to exert the performance of the cutting wheel.
3. Please do not use cutting wheels that do not meet the requirements.
4. If an abnormality is found during the cutting process, stop the machine immediately and investigate the cause.
5. When the cutting is not sharp, the grinding wheel should be trimmed and sharpened. If you continue to use it, there will be overheating, overloading and the possibility of damage to the grinding wheel.
6. When the grinding wheel is rotating, it is strictly forbidden to cut by hand, let alone touch the sand with your hands and body
7. The cutting wheel is prohibited for operations other than grooving or cutting to avoid abnormalities due to uneven force.